Skip to content

Resource · updated 2026-09-21

Print Size Cheat Sheet for Pakistan

The sizes Pakistani printers work to are mostly imperial for large format and metric for paper. Standees are 2ft × 6ft or 3ft × 6ft, backdrops are quoted in feet to the stage width, and paper stock runs A-series. Add 3mm bleed on paper and ask the printer for large format.

These are the sizes local printers quote without being asked, which makes them the cheapest to order and the fastest to turn around. Anything non-standard is possible, but it costs more and takes longer.

Large format in Pakistan is quoted in feet. Paper is quoted in the A-series. Ask for the spec sheet before artwork starts — a five-minute question that prevents a reprint.

Large format

ItemCommon sizeBleedSafe margin
Roll-up standee2ft × 6ft2in top and bottom3in from base — the cassette hides it
Large standee3ft × 6ft2in top and bottom3in from base
Stage backdropQuoted to stage width, often 12–24ft2in all round18in from the floor, heads and hems
Panaflex bannerAny size, artwork at 1:102in all round4in for eyelets and pole pockets
Welcome / sponsor wall8ft × 4ft upward2in all round6in all round

Paper and card

ItemTrim sizeBleedSafe margin
Visiting card89 × 51mm (3.5 × 2in)3mm4mm
A4 flyer / letterhead210 × 297mm3mm10mm
A5 flyer148 × 210mm3mm8mm
A3 poster297 × 420mm3mm10mm
Tri-fold brochure (A4)297 × 210mm, three panels3mm5mm, and never across a fold
Envelope (DL)220 × 110mm3mm8mm
Items cut in large stacks — wedding cards, invitations, anything ordered in thousands — often need 5mm bleed rather than 3mm, because the blade drifts through the pile.
For panaflex, build the artwork at one tenth of final size at 300 dpi. That gives 300 dpi at final scale with a file the shop can actually open.

Common questions.

Why is large format quoted in feet but paper in millimetres?

Because the two trades grew up separately. Flex and vinyl are cut from rolls measured in feet, while paper stock arrives in metric sheets. Quote each in the unit its trade uses and you avoid conversion errors.

What resolution does a panaflex banner need?

Around 300 dpi at one tenth scale, which is 30 dpi at final size — and that is genuinely enough, because it is read from several metres. Keep text and logos as vector so they stay crisp regardless.

How much should I leave at the bottom of a standee?

At least three inches. The retractable cassette swallows the lowest part of the print, and anything sitting there disappears the moment the banner is assembled.

Print Design

Rather have it done than looked up?

Start a project on WhatsApp (opens in a new tab)

Other resources

Start a projectCall